HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 226

Fabric OS Commands
Operands
For V3.1.x, none.
For V4.1.x, this command has the following operands:
-a
-p
Example
To display the error log without page breaks:
switch:switch:admin> errDump
Error 03
--------
0x2a5 (fabos): Jun 14 12:03:51
Switch: 0, Debug HAMKERNEL-IP_UP, 5, (session=3) Heartbeat up from Standby CP
Error 02
--------
0x2a5 (fabos): Jun 14 12:03:50
Switch: 0, Info HAM-REDUNDANT_INFO, 4,
(Heartbeat Up) System in REDUNDANT state
Error 01
--------
0x28b (fabos): Jun 14 12:01:27
Switch: 0, Error EM-CP_ERR, 2, CP in slot 5 set to faulty because of CP ERROR
switch:switch:admin>
See Also
errNvLogSizeSet
errNvLogSizeShow
errSaveLvlSet
errSaveLvlShow
errShow
226
Displays messages from the active error log. This
displays the error log messages generated during the
current run time cycle.
Displays messages from the persistent error log.
Fabric OS Version 3.1.x/4.1.x Reference Guide