Secpolicyfcsmove - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

secpolicyfcsmove

Move a member in the FCS policy.
Synopsis
secpolicyfcsmove [From, To]
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to move an FCS member from one position to another position
in the FCS list. Only one FCS can be moved at a time. The first FCS switch in the
list that is also present in the fabric is the Primary FCS.
If no parameters are specified, the command becomes interactive and prompts for
valid values for the operands.
Note:
moved to the first position, then it becomes the Primary FCS after activation.
Operands
This command has the following operands:
From
To
If no operand is specified the command becomes interactive and you are prompted
for values.
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command must be issued from the Primary FCS switch. If a Backup FCS is
Specify the position number of the FCS switch you want to move.
Specify the position that you want to move the FCS switch to.
secpolicyfcsmove
719