HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 819

Zoning
(V3.1.x only)
The switch summary is followed by one line per port:
Area
(V4.1.x only)
Slot
(V4.1.x only)
Port Number
(V3.1.x only)
Port
(V4.1.x only)
Module Type
(V3.1.x only)
SFP
(V4.1.x only)
Port Speed
(V3.1.x only)
Speed
(V4.1.x only)
Fabric OS Version 3.1.x/4.1.x Reference Guide
Displays the switch zoning mode: On or Off.
Each slot and port combination in the StorageWorks Core
switch is assigned an area number. For example, the area
number of slot 3/port 15 is 63 (in switch 0), the area number
for slot 10/port 15 is also 63 (in switch 1). This parameter is
for V4.1.x only.
Slot number. The StorageWorks Core switch has 10 slots
numbered from 1 to 4 and 7 to 10. Slots 5 and 6 are control
processor cards. This parameter is for V4.1.x only.
Port number. Valid values vary depending on the switch type.
Port module type (SFP or other):
-- No module present
sw - Shortwave laser
lw - Longwave laser
cu - Copper
id - Serial ID
Use sfpshow to view whether a serial ID SFP is sw/lw/cu.
The speed of the port:
1G - 1-Gbps fixed transfer speed
2G - 2-Gbpsvfixed transfer speed
N1 - 1-Gbps negotiated transfer speed
N2 - 2-Gbps negotiated transfer speed
AN - Auto negotiating
switchShow
819