Fabric OS Commands
Operands
None.
Example
To display control processor (CP) status:
switch:admin> haShow
Local CP (Slot 6, CP1): Active
Remote CP (Slot 5, CP0): Standby
HA Enabled, Heartbeat Up, HA State not in sync
See Also
haDisable
haEnable
haFailover
haShow
350
HA State Not
The system is unable to synchronize the two CPs, due to the
In Sync
Standby CP being faulty or another system error. If a fail-over
were to take place at this time, the Standby CP would be
rebooted, and the fail-over will be disruptive.
Fabric OS Version 3.1.x/4.1.x Reference Guide