Qlportdisable - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

qlPortDisable

Disable a QuickLoop port.
Synopsis
qlPortDisable port
Availability
Admin
Release
V3.1.x
Description
Use this command to change the specified port from QuickLoop mode to fabric
mode. This excludes any devices connected to the port from the QuickLoop, and
causes the switch to re-initialize the QuickLoop. If the switch that the port belongs
to has a partner that is running in QuickLoop mode, both switches re-initialize the
QuickLoop to form a loop that excludes any devices connected to the specified
port.
If the qlPortDisable command is entered for a port, the qlEnable
command has no effect on that port, because it has been removed from QuickLoop
management. The port must be re-enabled using the qlPortEnable
command.
The specified port must be in QuickLoop mode for this command to have effect.
Note:
Operands
This command has the following operand:
port
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command requires an Advanced Zoning license.
Specify the port number to be modified from QuickLoop mode to
fabric mode. Valid values for port number vary depending on the
switch type. This operand is required.
qlPortDisable
661