HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 488

Hp storageworks fabric os v3.1.x/4.1.x reference guide (aa-rs24c-te, june 2003)

Hide thumbs Also See for StorageWorks MSA 2/8 - SAN Switch:

Table of Contents

Fabric OS Commands

Specify up to 6 sets of Offset, Mask, and ValueList

separated by a semicolon (;). The entire grouplist

operand must be enclosed in quotation marks. This

operand is required.

The grouplist operand must be specified in the

following format:

"offset, Mask, ValueList; offset, Mask, ValueList"

For example:

"4, 0xff, 0x22; 12, 0xff, 0x01"

The grouplist component values are as follows:

Offset - Specify the offset within the frame. Offset 0

is the first byte of the SOF, and offset 4 is the first

byte of the frame header. The Offset must be in

decimal format. Valid values for Offset are 0,

[4-63]. Offset 0 is a special case which can be

used to monitor the first 4 bytes of SOFx frames.

EOF can not be monitored.

Mask - Specify the mask value to be applied

(ANDed) to frame contents.

ValueList - Specify up to four values that need to be

captured from frame contents. The ValueList can be

either hexadecimal or decimal format.

SOFx frames are considered a special case. The

Offset is specified as 0x0 and valueList is specified

Specify a name for this monitor. This character string

can be a maximum of 10 characters long and is

truncated if more characters are specified. This

operand must be enclosed in quotation marks. This

operand is optional.

Fabric OS Version 3.1.x/4.1.x Reference Guide