Hadump - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

hadump

Displays High Availability feature information.
Synopsis
hadump
Availability
All users.
Release
V4.1.x
Description
Use this command to display information about the status of the High Availability
feature in the Switch. This command displays the following information:
344
Local CP state (slot number and CP id);
Remote CP state (slot number and CP id);
High Availability Enabled/Disabled
Heartbeat Up/Down
Health of Standby CP. The Health of Standby CP can show one of the
following values:
Healthy The Standby CP is running and the background health
diagnostic has not detected any errors.
Failed The Standby CP is running, but the background health
diagnostic has discovered a problem with the blade. The logs
should be checked to determine the appropriate repair action.
Fail-over will be disabled until the Standby CP can be repaired.
HA Synchronization Status. The HA Synchronization Status field can show
one of the following values:
HA State The system is currently fully synchronized. If a fail-over were
Synchronized necessary at this time, the fail-over would be non-disruptive.
Fabric OS Version 3.1.x/4.1.x Reference Guide