Fabric OS Commands
-fdefoff offset
(V4.1.x only)
Errors: V4.1.x
When it detects failures, the subtest may report one or more of the following error
messages:
Example
To run the filterTest (V4.1.x example):
switch:admin> filterTest -txports 2/1-2/3
Running Filter Test ........... passed.
See Also
camTest
centralMemoryTest
cmemretentiontest
crossporttest
cmiTest
itemlist
portLoopbackTest
portRegTest
ramTest
spinSilk
sramRetentionTest
290
DIAG-FLTINIT
DIAG-FLTXMIT
DIAG-FLTRCV
DIAG-ACTTEST
DIAG-NUMTEST
Specify the program location to write filter test
definition data in filter definition memory. The
default value is 0. The maximum offset number is
set if the specified number is larger than limit.
Fabric OS Version 3.1.x/4.1.x Reference Guide