Nsallshow - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

nsAllShow

Displays global Name Server information.
Synopsis
nsAllShow [type]
Availability
All users.
Release
V3.1.x and V4.1.x
Description
Use this command to display the 24-bit Fibre Channel addresses of all devices in
all switches in the fabric. If the operand type is supplied, only devices of
specified FC-PH type are displayed. If type is omitted, all devices are displayed.
Note:
switch in the fabric. On a large fabric it is recommended
repeatedly issues the nsAllShow command with a type operand specified.
Operands
This command has the following operand:
type
456
Specifying the type operand causes the switch to send out a query to every
Specify the FC-PH type code. This operand is optional. The valid
values for this operand are 0 to 255. Below are two specific FC-PH
device type codes:
8 = FCP type device
4 , 5 = FC-IP type device
Other FC-PH types are displayed in the format "
code
FC4 " where
the FC-PH type code.
not
x
is the number of ports of a type, and
Fabric OS Version 3.1.x/4.1.x Reference Guide
to run a script that
x
ports supporting
code
is