Operands
This command has the following operands:
slotnumber
mode
Example
To turn the blade in slot 2 beaconing mode ON and then OFF:
switch:admin> bladeBeacon 2 1
switch:admin> bladeBeacon 2 1
See Also
switchShow
Fabric OS Version 3.1.x/4.1.x Reference Guide
Specify the slot number on which to enable
bladeBeacon.
Specify a value of 1 to set beaconing mode ON. Specify a
value of 0 to set beaconing mode OFF. This operand is
required.
bladeBeacon
69