Qldisable - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

qlDisable

Disable QuickLoop mode.
Synopsis
qlDisable
Availability
Admin
Release
V3.1.x
Description
Use this command to disable QuickLoop mode on a switch. All QuickLoop ports
are re-initialized to fabric mode, allowing public devices to perform fabric login.
If QuickLoop is being run on dual switches, this command disables the local
switch and causes the partner switch to re-initialize to a single-switch QuickLoop,
containing only the devices connected to the partner switch.
Note:
commands are not in effect. In this case, the qlPortDisable command can be
used to disable individual ports.
This command requires an Advanced Zoning license.
Operands
None.
Fabric OS Version 3.1.x/4.1.x Reference Guide
If Advanced Zoning is in use the qlDisable, qlEnable, and qlPartner
qlDisable
645