HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 597

6. 0x0020
7. 0x0040
8. 0x0080
9. 0x0100
10. 0x0200
11. 0x0400
12. 0x0800
13. 0x1000
14. 0x2000
15. 0x4000
16. 0x8000
The 6-bit register is tested with the following pattern for V4.1.x:
Repeat the above steps until all ASIC SRAMs and registers have been tested.
Operands
For V3.1.x, none.
For V4.1.x, this command has the following operands:
--slot number
-ports itemlist
Fabric OS Version 3.1.x/4.1.x Reference Guide
0x0001 0x0002
0x0010 0x0020
0x0100 0x0200
0x1000 0x2000
0x0004 0x0008
0x0040 0x0080
0x0400 0x0800
0x4000 0x8000
Specify the slot number that the diagnostic will operate on.
The ports specified will be relative to this slot number. The
default is 0.
Specify a list of blade ports to test. By default all the blade
ports in the specified slot will be used. See itemlist
help pages for further details.
portRegTest
597