Fabric OS Commands
setsfpmode
Enable or disable SFP mode.
Synopsis
setsfpmode [mode | -show]
Availability
Admin
Release
V4.1.x
Description
Use this command to enable or disable the SFP mode. If the mode operand is 1,
SFP mode is enabled; if the mode operand is 0, SFP mode is disabled. The mode
is saved in non-volatile memory and the SFP remains in that mode until the next
execution of setsfpmode.
The mode becomes active as soon as this command is executed. It does not require
a reboot to take effect.
The SFP mode, when enabled, forces crossPortTest and spinSilk to
limit testing to ports with SFPs present. Consequently, testing is limited to those
ports with a suspected problem.
Operands
This command has the following operands:
mode
-show
752
Specify 1 to enable SFP mode or 0 to disable SFP mode. If no mode
is specified the current value is displayed. The mode is saved in
non-volatile memory and remains unchanged until the next
execution of the setsfpmode command. This operand is
optional.
Specify the -show operand to display the current setting. This
operand is optional.
Fabric OS Version 3.1.x/4.1.x Reference Guide