Fabric OS Commands
Note:
FCS switch. See
Operands
None.
Example
To reset the version stamp to zero:
primaryfcs:admin> secversionreset
About to reset version stamp to 0.
Are you sure (yes, y, no, n):[no] y
Committing configuration... done.
Security Policy Version Stamp has been set to 0.
primaryfcs:admin>
See Also
secfabricshow
secmodedisable
secmodeenable
secmodeshow
sectransabort
744
When security is enabled, this command can only be issued from the Primary
"Security
Commands" on page 941.
Fabric OS Version 3.1.x/4.1.x Reference Guide