Configure Command Fabric Parameters Fields - HP StorageWorks 2/64 - Core Switch Command Reference Manual

Table 5 lists the fabric parameters fields and their settings.
Table 5

Configure command fabric parameters fields

Field
Domain
R_A_TOV
E_D_TOV
WAN_TOV
MAX_HOPS
Data Field Size
Sequence Level Switching
Disable Device Probing
Suppress Class F Traffic
Switch PID Format
Per-frame Route Priority
Long Distance Fabric
BB Credit
Insistent Domain ID Mode
Descriptions of the switch fabric setting fields are as follows:
Domain
R_A_TOV
E_D_TOV
WAN_TOV
124 Fabric OS commands
Type Default
number 1
number 10000
number 2000
number 0
number 7
number 2112
boolean 0
boolean 0
boolean 0
number 1
boolean 0
boolean 0
number 16
boolean 0
The domain number uniquely identifies the switch in a fabric.
This value is automatically assigned by the fabric. The range of
valid values varies depending on the switch model and other
system parameter settings.
The resource allocation time out value (R_A_TOV) is displayed in
milliseconds. This variable works with the variable E_D_TOV to
determine switch actions when presented with an error
condition.
Allocated circuit resources with detected errors are not released
until the time value has expired. If the condition is resolved prior
to the time out, the internal time-out clock resets and waits for the
next error condition.
Error detect time out value (E_D_TOV) is displayed in
milliseconds. This timer is used to flag a potential error condition
when an expected response is not received (an acknowledgment
or reply in response to packet receipt, for example) within the set
time limit. If the time for an expected response exceeds the set
value, then an error condition occurs.
Wide area network time out value (WAN_TOV) displays in
milliseconds. This timer is the maximum frame time out value for
a WAN, if any, interconnecting the Fibre Channel islands.
Range
varies
E_D_TOV * 2 to 120000
1000 to R_A_TOV / 2
0 to R_A_TOV / 4
7 to 19
256 to 2112
0 or 1
0 or 1
0 or 1
1 to 2
0 or 1
0 or 1
1 to 27
0 or 1