Fabric OS Commands
diagshowtime
Enable or disable elapsed time messages.
Synopsis
diagshowtime [mode | -show]
Availability
Admin
Release
V4.1.x
Description
Use this command to enable or disable show time mode. The mode is saved in
non-volatile memory and stays in that mode until the next execution of
diagshowtime.
The mode becomes active as soon as this command is executed. It does not require
a reboot to take effect.
Displays the time mode, when enabled, causes each test to display elapsed time
messages. It is normally used during burn-in and for test method debug.
Operands
This command has the following operands:
mode
-show
If no operand is specified the current value is displayed.
208
Specify 1 to enable show time mode, specify 0 to
disable show time mode. This operand is optional.
Specify this operand to display the current mode
setting. This operand is optional.
Fabric OS Version 3.1.x/4.1.x Reference Guide