Hashow - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

haShow

Displays control processor (CP) status.
Synopsis
haShow
Availability
Admin
Release
V4.1.x
Description
Use this command to display the control processor status, which includes:
Fabric OS Version 3.1.x/4.1.x Reference Guide
Local CP state (slot number and CP id)
Remote CP state (slot number and CP id)
High Availability Enabled/Disabled
Heartbeat Up/Down
Health of Standby CP. The Health of Standby CP can show one of the
following values:
Healthy The Standby CP is running and the background health
diagnostic has not detected any errors.
Failed The Standby CP is running, but the background health
diagnostic has discovered a problem with the blade. The logs
should be checked to determine the appropriate repair action.
Fail-over will be disabled until the Standby CP can be repaired.
HA Synchronization Status. The HA Synchronization Status field can show
one of the following values:
HA State The system is currently fully synchronized. If a fail-over were
Synchronized necessary at this time, the fail-over would be non-disruptive.
haShow
349