Fanshow - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

fanShow

Displays fan status.
Synopsis
fanShow
Availability
All users.
Release
V3.1.x and V4.1.x
Description
Use this command to display the current status of the switch fans.The format of
the display varies according to the switch model and number of fans. Some switch
models show fan speed measured in RPM (revolutions per minute).
Fan status is shown as:
OK
absent
below minimum
unknown
faulty
Note:
fans present.
Operands
None.
Fabric OS Version 3.1.x/4.1.x Reference Guide
Fan is functioning correctly.
Fan is not present.
Fan is present but rotating too slowly or stopped.
Unknown fan unit installed.
Fan has exceeded hardware tolerance.
The output from this command varies depending on switch type and number of
fanShow
259