uRouteRemove
Remove a static route.
Synopsis
uRouteRemove InArea Domain
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to remove a previously configured static route.
After this command is issued, the route to Domain for InArea may or may
not change. It changes if the previous static route was not along a minimum cost
path. Also, after this command is issued, the load sharing to Domain is
re-evaluated.
InArea can be either an F_Port or an E_Port.
Operands
This command has the following operands:
InArea
Domain
Examples
To remove a static route for all traffic coming in from port 1 and addressed to
domain 2:
switch:admin> uRouteRemove 1 2
done.
Fabric OS Version 3.1.x/4.1.x Reference Guide
The port that is statically routed. This operand is required.
The destination domain. This operand is required.
uRouteRemove
877