Qloopremove - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

qloopRemove

Remove a member from a QuickLoop.
Synopsis
qloopRemove "qloopName", "member;member"
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to remove one or more members from a QuickLoop.
The member list is identified through an exact string match; therefore, when
removing multiple members, order is important. For example, if a QuickLoop
contains "wwn3; wwn4", removing "wwn3; wwn4" succeeds, but removing
"wwn4; wwn3" fails.
If all members are removed, the QuickLoop is deleted.
When a configuration is enabled, all QuickLoops defined in the configuration
must resolve to one or two switch World Wide Names.
This command changes the Defined Configuration. For the change to be preserved
across switch reboots, it must be saved to non-volatile memory using the
cfgSave command. For the change to become effective, an appropriate zone
configuration must be enabled using the cfgEnable command.
Note:
When security is enabled, this command can only be issued from the Primary FCS
switch. See
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command requires an Advanced Zoning license.
"Security Commands" on page 941.
qloopRemove
655