Ifshow - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

ifShow

Displays network interface information.
Synopsis
ifShow ["ifName"]
Availability
All users.
Release
V3.1.x
Description
Use this command to display network interface status. If the operand ifName is
provided, only that interface is displayed. If ifName is omitted, all interfaces
are displayed. Each switch has three interfaces:
The "fc" interface is displayed for switches running IP over Fibre Channel that
have been assigned an FC-IP address. For each interface selected, the following
information is displayed:
Fabric OS Version 3.1.x/4.1.x Reference Guide
"ei" or "fei" is the 10BaseT or 100BaseT Ethernet interface
"lo" is the loopback interface
"fc" is the Fibre Channel interface
Flags (for example, loopback, broadcast, arp, running, debug)
Internet address
Broadcast address
Netmask and subnetmask
Ethernet address
Route metric
Maximum transfer unit
Number of packets received and sent
Number of input errors, output errors, and collisions
ifShow
369