qlPortEnable
Enable a QuickLoop port.
Synopsis
qlPortEnable port
Availability
Admin
Release
V3.1.x
Description
Use this command to change the specified port from fabric mode to QuickLoop
mode. This includes any devices connected to this port in the QuickLoop, and
causes the switch to re-initialize the QuickLoop.
If the switch that the port belongs to has a partner, and the partner is running in
QuickLoop mode, both switches re-initialize their QuickLoops to form a new loop
that includes the devices connected to this port.
The specified port must be in fabric mode for this command to have effect.
Note:
Operands
This command has the following operand:
port
Fabric OS Version 3.1.x/4.1.x Reference Guide
This command requires an Advanced Zoning license.
Specify the port number to be modified from fabric mode to
QuickLoop mode. Valid values for port number vary depending on
the switch type. This operand is required.
qlPortEnable
663