Fabric OS Commands
secpolicydelete
Delete an existing policy.
Synopsis
secpolicydelete "name"
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to delete an existing defined policy. The FCS_POLICY can not
be deleted through this command, since this policy must exist to maintain security
mode.
Each policy corresponds to a management method. The list of members of a
policy acts as an access control list for that management method. When security is
first enabled using the secmodeenable command only the FCS_POLICY
exists. Before a policy is created, there is no enforcement for that management
method, that is, all access is granted. After a policy has been created and a
member has been added to the policy, that policy becomes closed to all access
except from included members. If the policy is deleted all access is granted.
Note:
FCS switch. See
712
When security is enabled, this command can only be issued from the Primary
"Security
Commands" on page 941.
Fabric OS Version 3.1.x/4.1.x Reference Guide