HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 28

Fabric OS Commands
ACL entries also have a flag to set each host-subnet-area to be read-write or
read-only. Highest privilege matched out of six entries is given to the access. An
ACL check is turned off when all six entries contain "0.0.0.0."
Note:
into the WSNMP and RSNMP security policies. Community strings can be changed on
the primary FCS switch only and will propagate changes across the fabric. See
"Security
Operands
None.
28
When secure mode is enabled, the Access Control List feature is incorporated
Commands" on page 941.
Fabric OS Version 3.1.x/4.1.x Reference Guide