Savecore - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

savecore

Save or remove core files created by daemons.
Synopsis
savecore [-h host_name][-u user_name][-p password]
[-d remote_directory]
Availability
Admin
Release
V4.1.x
Description
Use this command to FTP or delete core files that were created by daemons during
signal processing such as SIGSEGV, SIGILL etc. The flags are useful only during
FTP process and will be used as default value while taking these parameters
interactively, except for -p password, which will not be prompted for if given
in the command line.
Operands
This command has the following operands:
-h host_name
-u user_name
-p password
-d remote_directory
Fabric OS Version 3.1.x/4.1.x Reference Guide
Specify a host-name if FTP requires it.
Specify a user-name for login in the above
host-name default will be anonymous.
Specify a password for the above user-name.
Specify the name of the remote directory into which
the core files are copied into. The directory will be
created if it does not already exists. It is assumed
that the user has sufficient privilege to create files at
this location.
savecore
681