Reboot - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

reboot

Reboot the switch.
Synopsis
reboot
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to reboot the switch. The reboot takes effect immediately as the
switch resets, then executes the normal power-on booting sequence.
While the switch is rebooting, the telnet session is closed and all Fibre Channel
ports are inactive. If the switch was part of a fabric, the remaining switches
reconfigure.
Note:
logical switches and both CPs. A confirmation message is displayed to verify that you
want to reboot the switch.
Operands
None.
Fabric OS Version 3.1.x/4.1.x Reference Guide
For the StorageWorks Core switch, the reboot command will reboot both
reboot
677