HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 148

Fabric OS Commands
Operands
This command has the following operands:
host
user
file
passwd
Example
To create a backup file of switch configuration information:
swd5:admin> configUpload "citadel","jdoe","config.txt","passwd"
upload complete
switch:admin>
If you enter the command with no operands, you are prompted for the appropriate
values:
switch:admin> configUpload
Server Name or IP Address [host]: 11.22.33.44
User Name [None]: user21
File Name [config.txt]: config-switch.txt
Password: xxxxxx
upload complete
switch:admin>
Errors
Listed below are possible reasons for a failure of this command:
148
Specify a host name or IP address in quotation marks; for
example, "citadel" or "11.22.33.44." The configuration file is
downloaded from this host system. This operand is optional.
Specify a user name in quotation marks; for example, "jdoe."
This user name is used to gain access to the host. This operand
is optional.
Specify a file name in quotation marks; for example,
config.txt
"
forward slash (/). Relative path names create the file in the
user's home directory on UNIX hosts, and in the directory
where the FTP server is running on Windows hosts. This
operand is optional.
Specify a password in quotation marks. This operand is
optional.
The host name is not known to the switch
The host IP address cannot be contacted
." Absolute path names may be specified using
Fabric OS Version 3.1.x/4.1.x Reference Guide