Diagskiptests - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

diagskiptests

Enable or disable diagnostics skip test flags.
Synopsis
diagskiptests [value | -show]
Availability
Admin
Release
V4.1.x
Description
Use this command to enable or disable the diagnostics skip test flags. The skip test
flags are saved in non-volatile memory and stay set until the next execution of
diagskiptests.
The mode becomes active as soon as this command is executed. It does not require
a reboot to take effect.
The skip test flags are used to skip the execution of certain POST tests that may
prove hazardous to normal switch operation. The exact use of this flag is
determined by the post scripts and the specific test methods that are used.
Operands
This command has the following operands:
value
-show
If no operand is specified the current value is displayed.
212
Specify a bit mask for tests to be skipped.
If specified or no value is given, the current skip test
flags will be displayed.
Fabric OS Version 3.1.x/4.1.x Reference Guide