HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 262

Fabric OS Commands
Each line of output shows:
Fabric Assist Mode: Enabled or Disabled
port
PID
Fabric Assist
Target
ALPA
PREF_ALPA
Status
Operands
None.
Example
This example shows two Fabric Assist host ports on the switch.:
switch:admin> fashow
Fabric Assist Mode:
Port PID
----------------------------------------------------------------------------
00 0x011001 Online
01 0x0111ef Online
262
Enabled
Fabric Assist Target
0x011498
0x011497
0x011490
0x01148f
0x011488
0x011484
0x011482
0x011481
0x011480
0x01147c
0x01147a
0x011475
0x0115ab
0x0115b4
0x0115b3
0x0115b2
0x0115b1
0x0115ae
0x0115ad
0x0115ac
The port number of the Fabric Assist host
The 24-bit Fibre Channel address of the host.
The Online/Offline status of the host.
The 24-bit Fibre Channel address of a zoned Target
that current has a phantom assigned to the host.
The assigned phantom ALPA for the target.
The preferred ALPA given for the target.
The Online/Offline status of the target.
ALPA PREF_ALPA
(0xef) (0xef)
(0x97)
(0x90)
(0x8f)
(0x88)
(0x84)
(0x82)
(0x81)
(0x80)
(0x7c)
(0x7a)
(0x75) (0xef)
(0xab) Online
(0xb4) Online
(0xb3) Online
(0xb2) Online
(0xb1) Online
(0xae) Online
(0xad) Online
(0xac) Online
Fabric OS Version 3.1.x/4.1.x Reference Guide
Status
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
Online
ALPA Conflict