HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 583

Cmd
Args
For a full explanation of the information displayed by this command refer to the
HP StorageWorks Fabric Operating System Procedures Version 3.1.x/4.1.x User
Guide.
Operands
This command has the following operands:
count
saved
portid
Fabric OS Version 3.1.x/4.1.x Reference Guide
Defined by the event. Refer to the
Operating System Procedures Version 3.1.x/4.1.x User Guide
more information.
Displays more information about the event.
For ioctl events, these are the I/O control arguments
For Tx and Rx, these are the first two header words and word four
of the FC-PH frame along with the first word of the payload and
internal decoding field.
Specify the maximum number of lines to display. Only the most
recent count entries are displayed. This operand is optional.
Specify a non-zero value to display the saved port log from the
last switch fault. See uptime for a list of conditions that cause a
fault. The count is ignored when displaying the saved log. This
operand is optional.
For V3.1.x, specify a non-zero value that specifies which port will
be displayed.
For V4.1.x, specify the area number of port to be displayed. If a
port area number is specified, all other ports on the switch are
ignored. This operand is optional.
HP StorageWorks Fabric
portLogShow
for
583