HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 143

To load a backup configuration file from a host system in V4.1.x:
switch:admin> configdownload "123.123.123.123","jdoe","config.txt",
"password1"
Committing configuration...done.
download complete
If you enter the command with no operands, you are prompted for the appropriate
valuesin V4.1.x:
switch:admin> configdownload
Server Name or IP Address [host]: 11.22.33.44
User Name [None]: user21
File Name [config.txt]: config-switch.txt
Password: xxxxxxxxx
download complete
switch:admin>
Errors
Listed below are possible reasons for a failure of this command:
See Also
configDefault
configUpload
configShow
configure
Fabric OS Version 3.1.x/4.1.x Reference Guide
The host name is not known to the switch
The host IP address cannot be contacted
The user does not have permission on the host
The user runs a script that prints something at login
The file does not exist on the host
The file is not a switch configuration file
The FTP server is not running on the host
The configuration data contains errors.
configDownload
143