Switchstatuspolicyshow - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

switchStatusPolicyShow

Displays the policy parameters that determine the overall switch status.
Synopsis
switchStatusPolicyShow
Availability
All users.
Release
V3.1.x and V4.1.x
Description
Use this command to view the current policy parameters set for the switch. These
policy parameters determine the number of failed or non-operational units allowed
for each contributor before triggering a status change in the switch.
The command will print the current parameters in a three column table format.
The first column specifies the contributor; the second column specifies the
minimum number that contributes to the DOWN/FAILED status; the third column
specifies the minimum number that contributes to the MARGINAL/WARNING
status. The default values for the policy parameters are as follows:
Table 17: Contributor Value and Status
Contributor
FaultyPorts
MissingSFPs
PowerSupplies
Temperatures
Fabric OS Version 3.1.x/4.1.x Reference Guide
Default Value for
DOWN
2
0
2 (V3.1.x only)
2 in the StorageWorks 2
Gb SAN switch (V4.1.x
only)
3 in the StorageWorks
Core switch (V4.1.x
only)
2
switchStatusPolicyShow
Default Value
for MARGINAL
1
0
1
1
831