Secpolicyabort - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

secpolicyabort

Aborts all changes to the defined database that have not been saved.
Synopsis
secpolicyabort
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to abort all changes to the defined security database that have
not been saved to flash memory.
Note:
FCS switch. See
Operands
None.
Example
To abort all changes that have not been saved to flash memory:
primaryfcs:admin> secpolicyabort
Unsaved data has been aborted.
primaryfcs:admin> secpolicyabort
No new data to abort.
Fabric OS Version 3.1.x/4.1.x Reference Guide
When security is enabled, this command can only be issued from the Primary
"Security Commands" on page 941.
secpolicyabort
699