Fabric OS Commands
Operands
This command has the following operands:
portnumber
When no operand is specified, the command reports the current port persistent
disable status for all ports in the switch. The value of YES is displayed for ports
that are persistently disabled.
Example
To configure port 3 as persistently disabled:
switch:admin> portcfgpersistentdisable 3
Committing configuration...done.
switch:admin> portcfgpersistentdisable
Ports:
0
1
--------------------------------
Disabled -
-
switch:admin>
See Also
configure
configshow
configdefault
portcfgdefault
portcfgpersistentenable
portcfgshow
portshow
switchshow
550
Specify a port number. Valid values for port number vary
depending on the switch type. This operand is required.
2
3
4
5
6
-
YES -
-
-
7
-
Fabric OS Version 3.1.x/4.1.x Reference Guide