HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 868

Fabric OS Commands
--slot number
(V4.1.x only)
-passcnt count
(V4.1.x only)
-ports itemlist
(V4.1.x only)
Example
To execute this test (V3.1.x example):
switch:admin> turboRamTest
Running Turbo RAM Test ........ passed.
To execute this test (V4.1.x example):
switch:admin> > turboramtest -passcnt 2 -ports 2/0-2/63
Running Turbo RAM Test ........ passed.
Errors
When it detects failures, the subtest may report one or more of the following error
messages:
868
DIAG-WTEST - Memory fill operation failed.
DIAG-INC_RWTEST - Memory r-m-w increment subtest failed.
DIAG-DEC_RWTEST - Memory r-m-w decrement subtest failed.
DIAG-RAMINIT_TO - Memory initialization timed out.
Specify the slot number in a StorageWorks Core switch.
The slot number must be followed by a slash ( / ) and the
port number.
The StorageWorks Core switch has a total of 10 slots
counted from 1 to 10. Slot number 5 and 6 are control
processor cards, and slot 1 through 4, and 7 through 10,
are switch cards. On each switch card, there are 16 ports
counted from the bottom, 0 to 15. A particular port must
be represented by both slot number (1 through 4, or 7
through 10), and port number (0 through 15).
This operand is not required for switches that do not have
slots.
Specify the number of times to perform this test. The
default value is 1. This operand is optional.
Specify a list of blade ports to test. By default all the blade
ports in the specified slot are tested. See the itemlist
command help page for more information. This operand
is optional.
Fabric OS Version 3.1.x/4.1.x Reference Guide