HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 305

5. Compare ECHO data transmitted is equal to the ECHO data received.
6. Repeat
You can specify a payload pattern to be used when executing this test. If the
pattern is not user specified, then at every 30 pass, a different data type from a
palette of seven is used to generate different data pattern to create the frame. The
data pattern will be generated based on each data type. Some data types may
generate different data pattern on every pass, and other data type may not change
the data pattern in every pass. These seven data types will be repeated every 210
pass. The data palette is as follows:
Operands
This command has the following operands:
-nframes count
-ports itemlist
-seed
payload_pattern
-width
pattern_width
-size
pattern_size
Fabric OS Version 3.1.x/4.1.x Reference Guide
step 3 through
a. The number of frames requested is reached,
b. All ports are marked bad.
1) CSPAT:
2) BYTE_LFSR:
3) CHALF_SQ:
4) QUAD_NOT:
5) CQTR_SQ:
6) CRPAT:
7) RANDOM:
step 5 for all ports present until:
0x7e, 0x7e, 0x7e, 0x7e,...
0x69, 0x01, 0x02, 0x05,...
0x4a, 0x4a, 0x4a, 0x4a,...
0x00, 0xff, 0x00, 0xff,...
0x78, 0x78, 0x78, 0x78,...
0xbc, 0xbc, 0x23, 0x47,...
0x25, 0x7f, 0x6e, 0x9a,...
Specify the number of times (or number of frames per
port) to execute this test. If omitted, the default value
used is 10. This operand is optional.
Specify the ports to run to test on. If omitted, the test will
be executed on all online F_ports in the specified slot.
This operand is optional.
Specify the pattern of the test packets payload. When
payload_pattern is set to 0, all seven different data
types will be used. This operand is optional.
Specify the width of the pattern which user specified.
When payload_pattern is set to 0x00,
pattern_width will be ignored. Valid values are:
1 = byte
2 = word
4 = quad
This operand is optional.
Specify the number of words of the test packets
payload. If omitted, the default value is 512. This
operand is optional.
fporttest
305