Secversionreset - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

secversionreset

Reset the version stamp to zero.
Synopsis
secversionreset
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to reset the version stamp of all switches in a fabric to zero, so
that it can be joined to the another secure fabric.
When merging two or more secure fabrics, the following steps should be taken:
1. Determine which secure fabric will become the FCS_POLICY controller
2. Use the secpolicyadd, secpolicyremove, and
3. Reset the version stamp using the secversionreset command on each
4. Cascade the fabrics together. When the secure fabrics are merged, the primary
Fabric OS Version 3.1.x/4.1.x Reference Guide
fabric, that is the dominant fabric to which all other secure fabrics will be
merged.
secpolicyactivate commands to modify the FCS_POLICY of the
merging fabrics to match the FCS_POLICY of the controller fabric. All
secure fabrics to be merged must have identical FCS_POLICY lists. The FCS
policies of merged fabrics must match exactly, that is, they must contain the
same FCS members and in the same order, or the merge will fail.
secure fabric to be merged into the controller fabric. The controller fabric does
not require a version reset.
FCS switch in the controller fabric will propagate its security policies across
the newly formed fabric.
secversionreset
743