Fabric OS Commands
firmwarerestore
Restore old active firmware image.
Synopsis
firmwarerestore
Availability
Admin
Release
V4.1.x
Description
Use this command to restore the old active firmware image.
After a firmwareDownload and a reboot, the downloaded firmware will
become active. If you then do not want to commit the firmware, and instead want
to restore the old firmware, run firmwareRestore. After running
firmwareRestore, you can run firmwareDownload again.
This command will reboot the system and make the old firmware active. After
reboot, both active and backup images should be restored to the old firmware.
This command will only take action if the system is booted after a
firmwareDownload. Otherwise, it will return with an error code.
Operands
None.
Example
To restore old active firmware image:
switch:admin> firmwarerestore
Restore Kernel Image...
................................
No firmware undo is needed
switch:admin>
300
Fabric OS Version 3.1.x/4.1.x Reference Guide