Portcfgeport - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

portCfgEport

Enable or disable a port from becoming an E_Port.
Synopsis: V3.1.x
portCfgEport portnumber, mode
Synopsis: V4.1.x
portCfgEport [slotnumber/]portnumber, mode
Availability
Admin
Release
V3.1.x and V4.1.x
Description
This command allows a user to enable or disable a port from becoming an E_Port.
The E_Port capability is enabled by default unless this command is used to disable
it.
When a port is configured as a non-E_Port through this command, an ISL
connected to this port will be segmented. No data traffic between two switches
will be routed through this port. Fabric management data, such as zoning
information, will not be exchanged through this port either.
The configuration is saved in the non-volatile memory and is persistent across
switch reboot or power cycle.
Fabric OS Version 3.1.x/4.1.x Reference Guide
portCfgEport
535