Licenseremove - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

Fabric OS Commands

licenseRemove

Remove the license key from a switch.
Synopsis
licenseRemove "license"
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to remove an existing license key from a switch. The existing
license key must be entered exactly as shown by licenseShow, including case.
When the key has been entered, use the licenseShow command to verify that the
key has been removed and the licensed product uninstalled.
After removing a license key, the switch must be rebooted. With no license key,
licenseshow displays "No licenses."
Operands
The following operand is required:
license
Example
To remove a license key from the switch:
switch:admin> licenseRemove "bAaAabRdScRfc0iK"
removing license key "bAaAabRdScRfc0iK"
Committing configuration...done.
For license to take effect, Please reboot switch now....
402
Specify the license key in quotation marks. This operand is
required.
Fabric OS Version 3.1.x/4.1.x Reference Guide