Diagshow - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

diagshow

Displays diagnostics status.
Synopsis: V3.1.x
diagshow [nSeconds]
Synopsis: V4.1.x
diagshow [--slot slotnumber][-uports itemlist][-bports
itemlist][-use_bports value]
Availability
All users.
Release
V3.1.x and V4.1.x
Description
For V3.1.x, use this command to display the diagnostics status for switch was last
rebooted.
For V4.1.x, use this command to display the diagnostics status for the specified
list of blade or user ports.
The following information is displayed:
Fabric OS Version 3.1.x/4.1.x Reference Guide
The state of all ports in the switch based on the results of diagnostic
executions since the last reboot. Ports which passed diag testing are marked
OK. Ports which failed one or more diag tests are marked BAD.
The current state of the ports: active ports are shown as UP and inactive ports
are shown as DN.
The frame counts of active ports. The number of frames transmitted are
indicated by "frTx" and the number of frames received are indicated by
"frRx." The "LLI_errs" is the sum of the port's 8 statistic error counters:
ENC_in, CRC_err, TruncFrm, FrmTooLong, BadEOF, Enc_out,
BadOrdSet, DiscC3
diagshow
205