Secfcsfailover - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual

secfcsfailover

Enables a Backup FCS switch to take over as Primary FCS switch.
Synopsis
secfcsfailover
Availability
Admin
Release
V3.1.x and V4.1.x
Description
Use this command to enable a Backup FCS switch to take over as the Primary
FCS switch.
This command can only be issued on a Backup FCS switch. After this command
is issued, the current Primary FCS switch will abort its current transaction and
move the Backup FCS switch where this command is issued to be the first
member in the FCS list. The current Primary FCS switch will then activate the
new policy set and the Backup FCS switch which issued this command will
become the new Primary FCS switch in the fabric.
The purpose of this command is to recover from a scenario where all available
access to the Primary FCS switch is lost, such as the Ethernet and serial
connections.
Operands
None.
Fabric OS Version 3.1.x/4.1.x Reference Guide
secfcsfailover
685