HP StorageWorks MSA 2/8 - SAN Switch Reference Manual page 574

Fabric OS Commands
Cmd
Args
For a full explanation of the information displayed by this command refer to the
HP StorageWorks Fabric Operating System Procedures Version 3.1.x/4.1.x User
Guide.
Operands
This command has the following operands:
count
saved
portid
Example
To display the port log:
switch:admin> portlogdump 10
time
-----------------------------------------------------
16:51:15.499
16:51:15.499
16:51:15.499
16:51:15.499
16:51:15.499
16:51:15.499
16:51:15.499
16:51:15.499
16:51:15.499
16:58:28.383
switch:admin>
574
Defined by the event. Refer to the
Operating System Procedures Version 3.1.x/4.1.x User Guide
more information.
Displays more information about the event.
For ioctl events, these are the I/O control arguments
For Tx and Rx, these are the first two header words and word four
of the FC-PH frame along with the first word of the payload and
internal decoding field.
Specify the maximum number of lines to be displayed. Only the
most recent count entries are displayed. This operand is optional.
Specify a nonzero value to display the saved port log from the last
switch fault. See uptime for conditions that cause a fault. The
count operand is ignored when displaying the saved log. This
operand is optional.
Specify the port to be displayed. All other ports will not be
displayed. This operand is optional.
task event port
tShell ioctl
tShell ioctl
tShell ioctl
tShell ioctl
tShell ioctl
tShell ioctl
tShell ioctl
tShell ioctl
tShell ioctl
tShell create
cmd args
7 de 10f9bb90,0
8 de 10f9bb90,0
9 de 10f9bb90,0
10 de 10f9bb90,0
11 de 10f9bb90,0
12 de 10f9bb90,0
13 de 10f9bb90,0
14 de 10f9bb90,0
15 de 10f9bb90,0
tSyslog
Fabric OS Version 3.1.x/4.1.x Reference Guide
HP StorageWorks Fabric
for