Chapter 4: Server configuration
3. Click Install. The system responds with a message that installation of authentication file is
successful.
If you get a filesync failed message, ignore it.
Configuring the server manually
Note:
If you are configuring the server as a main server, the license files and the
Note:
authentication files must be downloaded on the server. See
and authentication files
Setting the date, time, and time zone
!
Important:
Be sure to set the date, time, and time zone before manually configuring the
Important:
server. Failure to do so may cause network problems.
To set the date, time, and time zone:
1. From the Main Menu, under Server, click Server Date/Time.
2. In the Server Date/Time window, verify the date and time are correct. If the date and time
are incorrect:
a. Enter the date in the format mm/dd/yyyy.
b. Enter the time in 24 hour format (hh:mm).
c. Enter the time zone.
d. Click Submit.
e. Reboot the server: For more information, see
Rebooting the server
1. Click Shutdown Server under the Server heading.
2. Select Delayed Shutdown and Restart server after shutdown.
3. Click Shutdown.
You will be logged off the server when it reboots. When you are waiting for the system to
reboot, enter ping -t 192.11.13.6 from a command prompt window on your services laptop
computer to start a continuous ping command.
42 Installing and Configuring the Avaya S8500-Series Server
on page 41.
Installing the license
Rebooting the server
on page 42.