CHAPTER 18 SERIAL PROGRAMMING CONNECTION
18.1
Overview
The MB91F264B supports the serial onboard writing (Fujitsu standard) of the flash
memory. The following explains its specification.
■ Basic Configuration of the Serial Programming Connection
Fujitsu standard serial onboard writing uses the AF220/AF210/AF120/AF110 flash microcontroller
programmer by Yokogawa Digital Computer Corporation. The writing can be done by the program of the
single-chip mode operation. Figure 18.1-1 shows the basic configuration of MB91F264B serial
programming connection.
Figure 18.1-1 Basic Configuration of Serial Programming Connection
Note:
For information about the functions of and operational procedures related to AF210 flash microcontroller
programmer, the general-purpose common cable (AZ210) for connection, and the connector, please
contact Yokogawa Digital Computer Corporation.
432
Host interface cable
AF220/AF210/
AF120/AF110
RS232C
flash
microcontroller
programmer
+
memory card
Operable in stand-alone mode
General-purpose common cable
(AZ210)
CLK synchronous
serial connection
MB91F264B
user system