Fujitsu MB91260B Series Hardware Manual page 450

■ System Configuration of AF200 Flash Microcontroller Programmer (Yokogawa Digital
Computer Corporation)
Type
AF220 /AC4P
AF210 /AC4P
Main
body
AF120 /AC4P
AF110 /AC4P
AZ221
AZ210
FF201
AZ290
/P4
For inquiries:
■ Oscillation Clock Frequency
For the write operations on flash memory, the oscillation clock that can be used is 4 MHz.
■ Other Precautionary Information
The port state for flash memory writing via a serial programmer is the same as the reset state except the pin
used for writing operation.
Model with built-in Ethernet interface
Standard model
One-touch key model with built-in Ethernet interface /100 V to 220 V power adapter
One-touch key model
Programmer dedicated RS232C cable for PC/AT
Standard target probe (a) length: 1 m
Fujitsu FR flash microcontroller control module
Remote controller
4 MB PC Card (Option) FLASH memory capacity of up to 512 KB supported
Yokogawa Digital Computer Corporation
Tel: +81-42-333-6224
CHAPTER 18 SERIAL PROGRAMMING CONNECTION
Function
/100 V to 220 V power adapter
/100 V to 220 V power adapter
/100 V to 220 V power adapter
435