Differences Between Mb91F465Xa And Emulation System; Overview About Differences - Fujitsu MB91F465XA Application Note

Chapter 3 Differences between MB91F465XA and Emulation System

3 Differences between MB91F465XA and Emulation System

The chapter describes the differences between the emulation system and MB91F465XA
series.

3.1 Overview about differences

Feature
Maximum
Operating
Frequency
FlexRay Port 31
E-Ray Register
start address
E-Ray IP version
CIF0 (CUST0)
Register value
CREL Register
value
E-Ray Clock
Register
E-Ray Interrupts
Interrupt vector
table (Intvect)
DMA
Table 3-1: Overview of the differences between MB91F465XA and emulation system
MCU-AN-300015-E-V11
MB91F465XA EMULATION
Emulation system
(MB91V460A + MB88121B)
MB91V460A: 80 MHz
Not available
0x50.0000
1.0 RC1
0x0430.79FF
0x0726.0412
CIF1 (CUST1) register
E-Ray interrupts connected to
external Interrupts
External Interrupt
Setup via external bus DMA
transfer request
- 12 -
MB91F465XA series
100MHz
Must be set
0x00.D000
1.0
0x04FF5BFF
0x1006.0519
PLL2 registers
E-Ray interrupts set in E-Ray
interrupt register
FlexRay Interrupts
Setup via CIF1 / 2 register
© Fujitsu Microelectronics Europe GmbH