Display Port - Avaya Definity SI Maintenance Manual

display port

Field descriptions (page 2)
Name
IP Address
display port
This command displays the port location, the equipment connected to the port,
and the means by which the port can be identified (for example, an extension
number, the trunk group and member, and so on).
Action/
Object Qualifier
display location
port
print
schedule
1 Refer to the Report Scheduler and System Printer feature specification for more details.
555-233-123
Non-specific node name (up to 15 characters each) for CMS
nodes, DCS nodes, and so forth. Valid entries are
alpha-numeric and/or special characters for identification.
IP address for the adjunct or switch. Enter 0 - 255 or leave
blank.
Qualifier Description
Port address (PCSSpp)
Report sent to printer
Command is validated and
then a scheduling form
displays to schedule execution
of the command. The
command is then placed in the
command queue and is
executed at the specified time.
The information displayed by
the command is sent to the
system printer instead of the
1
screen.
Examples:
display port 1c0801
display port 1c0802 print
display port 2c1504
schedule
Feature
Logins Defaults Interactions
init none none
inads
craft
cust
browse
Issue 4 May 2002 8-107