Display Test-Schedule - Avaya Definity SI Maintenance Manual

Maintenance Commands and Trouble-Clearing Aids
Adjustable
Make/Break
Ratio
Dial Command
No Answer
Time-Out

display test-schedule

Automatic Transmission Measurement System (ATMS) provides advanced
maintenance procedures for monitoring system trunk facilities. This system
performs transmission tests on system trunks to determine if trunks are
performing satisfactorily. These tests can be initiated in two ways:
demand
scheduled
8-122 Issue 4 May 2002
This field can be of particular importance when using a modem that
may be transferable from country to country. The intent of this field is
to control the make/break ratios of pulses and DTMF dialing. The Intel
product information has support for the different make/break options
for pulse dialing only.
Intel uses the option "&P0" to select a ratio of 39% make and 61%
break for communication within the U.S. and Canada. The option
"&P1" sets a ration of 33% make and 67% break for the U.K. and
Hong Kong.
This field is 5 characters long and is case in-sensitive. ()
This field simply denotes the dialing command of the modem. This is
a fairly standard command. (D)
Most off-the-shelf external modems provide a timer that abandons
any outbound data call after a predetermined interval. Some modems
provide for this timer to be disabled, thus allowing an outbound call to
ring indefinitely. AT&T Paradyne does not provide this capability with
their modem line, because it is generally undesirable to have an
outbound call attempt ring indefinitely.
The internal modem must have this parameter disabled or set to at
least 255 seconds.
This is a non-administrable parameter. For the external modem
connection, this parameter will be the first initialization string to be
transmitted to the external modem. This field will be visible on the
administration form in display mode only.
This hardcoded constant can be overridden for type approval
applications, specifically in the U.K and other Western European
nations, by the use of the "Misc. Init. Param:" field. (S7=255)
user enters command at the System Administration Terminal
(SAT) to initiate a test immediately
schedules tests through a schedule form to automatically initiate
tests at a predetermined time
555-233-123