List Mst - Avaya Definity SI Maintenance Manual

list mst

Field descriptions
Sig Grp No
Region
Hour Average
Latency (ms)
Hour Packets Sent
Hour Packets%
Lost
Hour & Worst
Interval
Interval Average
Latency (ms)
Interval Packets
Sent
Interval
Packets % Lost
list mst
This command displays the messages in the trace buffer and can be used when
the trace is disabled or active, but if active, older messages may be sporadically
omitted if wraparound is selected and the message rate is high. The command
can be used repeatedly without destroying the integrity of the buffer.
Action/
Object Qualifier
list mst from
message
number
count number
555-233-123
The group number, rank ordered.
The network region of the group.
The average latency for the whole hour.
The number of packets sent during the whole hour.
The percent lost packets for the whole hour (if 100% the
corresponding latency is shown as ****).
The hour and worst 3 minute interval within the hour. (The
interval is identified by the last minute of the interval.)
The average latency for the interval.
The number of packets sent during the interval.
The percent lost packets for the interval (if 100%, the
corresponding latency is shown as *****).
Qualifier Description
Message number to start
the display; if the number is
not in the buffer, then that is
indicated on the display,
and no additional
messages are displayed.
Omitting this qualifier
causes messages to be
displayed starting with the
oldest FIFO and continuous
messages.
Message count; can be
used to limit the trace
Feature
Logins Defaults Interactions
init FIFO See system
inads order printer
documentation.
Issue 4 May 2002 8-177